Drop Tester

Drop test system is used to simulate fall condition to determine the drop bearing capacity of the specimen to in the transportation and handling process. The specimen’s surface, edges and corners are tested for its reliability & fatigue. The test insights will support you in improving and perfecting the package design.

Features

  • For safety & reliability, upper & lower displacement limits are provided.
  • The zero free-drop test stand has a double rail guiding device for the stable lifting operation
  • Clamping fall test can be performed on surface, edge and corners at different angles.
  • The test system can be placed on flat marble or concrete ground for installation, without any special foundation.

Technical Specifications

 

Specification/ ModelClassification Drop TesterZero Drop Tester
SY40(A)-315SY40(A)-320SY42-1000SY42-2000SY42-5000
Max.Payload (kg)100100100020005000
Drop Height (mm)300~1500300~2000
Specimen size (mm)1000 x 800 x 10001200 x 800 x 1000
Bottom Plate size (mm)1000 x 800 x 10001200 x 800 x 1000
Test ModeFace, Ledge, CornerFace, Ledge, Corner
Dimension (L x H x W:mm)1700 x 1200 x 25401700 x 1200 x 2940150 x 90 x 500200 x 150 x 660350 x 250 x 800
Power Consumption (k VA)0.850.85Rechargeable battery
Weight (kg)800900304575
Power SupplyThree-phase 380 V, 50/60 Hz
StandardGJ/T4857.5-92   ISO2248-1985 ( E )   GB/T2423.5   IEC68-2-27  
Working environmentTemperature range 0~40° C, humidity range ≤ 80% (non condensing)

Let's Talk About Your Needs

Let's Talk